How to Remove a Stripped Screw (Easy Way)

2 Shares

Every handyman’s life is filled with different challenges, and one of them is to remove a stripped screw, which is a stubborn one. No matter how hard you try, you can’t pull it out through a screwdriver. Leaving screws in the material isn’t unquestionably the right choice; thereby, you must know how to remove a stripped screw. In this post, you will explore six different ways to remove a very stubborn stripped screw; every method works surefire in a particular situation. Before a screw ruins your whole day, it’s time to know six effective solutions to this dilemma.

How to Remove a Stripped Screw
How to Remove a Stripped Screw

Use a Rubber Band

Grab a wide rubber band and bring some friction between the screwdriver and screw through it. The main reason for using it is to get extra grip. Place the rubber band on the screwhead and then firmly set the screwdriver in the screwhead. The band’s rubbery surface will keep the screwdriver inside the head and won’t let it slip out. In case you don’t have a rubber band nearby, you can use a bit of steel wool as an alternative.

Use a Rubber Band
Rubber Band

When a screw isn’t entirely stripped, this rubber band will fill those stripped areas, thereby offering much-needed friction. Use a rubber band to remove a stripped screw.

Remove it Through Drill

When a screw isn’t hidden inside the material, you can make the most of an electric grill in that situation. 

Remove it Through Drill
Drill

How to do it? First of all, you will open the chunk of the Drill, set it on the screwhead. Keep your hand tight on the chuck jaws over the screw, don’t lose your grip else you will not get desirable results. You can gently back the screw out of the surface by setting the Drill in the reverse position. Whether you have a bolt stuck in the material or a stubborn stripped screw, an electric drill will save the day.

Try a Screw Extractor

Sometimes, you come across a stubborn screw that is hard to remove any other way. In that case, you need to pick a screw extractor. This method is a bit destructive, but it’s better to get rid of a screw than to wait for it to come out magically. A screw extractor is undoubtedly the best option to choose at this point as screw extractors are counter-threaded in comparison with a screw, aka a screw extractor features a left-hand twist while a screw is right-hand twist. While going with this method, make sure that you are using the screw extractor’s right size. 

Screw Extractor
Screw Extractor

How to remove stripped screws with a screw extractor? It’s a pretty quick solution. First, you will load the extractor into the check of drills, tighten your hands on the chuck of Drill, set Drill in the reverse motion, and you will see screw backing out of the material. That’s it.

Cut a Notch

When the Drill doesn’t work, certainly a screw has stuck deep inside the material, and for backing it out, you must have to cut a notch. You should know that this method is more destructive as you might damage the surrounding surface while following this method. Therefore, one must opt to remove the stripped screw only when no other way is working fine.

Cut a Notch
Cut a Notch

You will cut a notch in the screw head with a rotary tool and a cutting wheel. The purpose of this cut is to find some space where a flathead screwdriver is placed to remove a screw from the surface.

Liquid Friction

As handymen often face this challenge of stripped screw removal, therefore tons of OTC products make the job easier. You can find unique products meant to increase friction so you can quickly get rid of stripped screws. You should know that this product’s mechanism is exactly like the rubber band method I explained above. Besides, if a screw has gone too far inside a material, you can’t remove it through a liquid friction product. Keep in mind this point while buying any of them.

Wood Plug Cutter

In case a stripped screw can’t be seen from the surface of the material because it has sunken inside the material, it’s time to go a bit more destructive and try a wood plug cutter method. As the name tells you a bit, you will get rid of all the wood so you can access a stripped screw.

Wood Plug Cutter
Wood Plug Cutter

How to remove stubborn stripped screws with a wood plug clutter? You will set the cutter in an electric drill and place it above the screw. Cutter will go in contact with the wood and remove the material above and around this screw. You will keep drilling until you can access the screwhead. Remove the plug cutter, clean all the mess or wood debris, and then use a screwdriver and back out this stubborn screw from timber.

Images Credit: instructables.com

2 Shares